One area of significant water waste is a result of dripping faucets manually to prevent them from freezing. Typically, the faucet has to be dripping water at a rate that will prevent the faucet from freezing at the coldest temperature anticipated. This method wastes a lot of water. The Freeze Miser™ outdoor faucet freeze protector provides the same method of freeze protection using the least amount of water possible. 

Properly installed, the Freeze Miser™ senses the internal water temperature. Its activation temperature is 37°F. Until the activation temperature is attained, no water will be allowed to drip. After the water temperature has dropped to 37°F or slightly below, the Freeze Miser™ will release a minimum amount of water until the internal water temperature is again above 37°F and then stop the water release. Water utilities, water wells, etc. almost always supply water to the end-user that is well above 37°F.

Now available in single or double packs! 

Important:

• Do not wrap or insulate Freeze Miser. Doing so will void the warranty!
• The Freeze Miser is not warranted to protect piping systems.
• Faucet must be turned on and supply at least 10 psi to the Freeze Miser (Can't go over around 200 psi).
• Prior to the cold season, it is always a good idea to place the Freeze Miser in a freezer for several hours. Then quickly place on an outdoor faucet and open the faucet. Water should discharge through the Freeze Miser, and the flow should stop in a short period of time.
• 2-year limited replacement warranty.